Design Features :

1. Color coded springs to facilitate identification.
2. Powder coated springs.
3. Load upto 5000 kgs.*
4. Deflection upto 25mm*
5. 4 Models
6. 26 Load Ranges
7. Deflection is at rated load with 15% Tolerances.
8. All mounts have approximately 50% overload capacity.
9. Unique mount design provides horizontal stability, high loading capacity and protective spring enclosure
10. All mounts have external leveling arrangement, capable of compensating for full static deflection.
11. Inner walls of lower casing have resilient rubber snubbers which;
    1. Eliminates possibility of binding by providing a smooth guide path for the top casing.
    2. Limits lateral movement, particularly due to start-up, shut-down and horizontal wind load.
       
    3. Prevents isolator short-circuiting by avoiding metal to metal contact.
12. Neoprene inserts below springs and 6 mm thick ribbed base pad act as noise breaks for high frequencies in the audible range, which can otherwise get transmitted to building structure.
13. Mountings must be adjusted so that upper housing clears lower housing by at least 6 mm and not more then 12 mm

Typical Applications :

Application examples include : Chillers, AHU's Pumps, Centrifugal / Axial Fans, Condensing Units, Rooftop Packaged Units, Reciprocating Compressors, DG Sets, Punch Presses, Drop Hammers, Floor Pipe Supports (normally at first few pipe support points leading from isolated equipment).

Note : *Custom load and deflection are also available.